UltraTech

UltraTech 8514 Containment Berm, Ultimate Model, Copolymer 2000, Custom Size

SKU 8514

The UltraTech 8514 Containment Berm, Ultimate Model is a made-to-order Copolymer 2000 berm built to the length and width you specify. Its end walls use a living hinge that bends under a vehicle and springs back to vertical once it has passed, so drivers never stop to lower a wall, while PVC sidewall assemblies hold up the two long sides. It combines convenience and economy for drums, IBCs, vehicles, equipment and frac tanks, and for leaks during equipment maintenance or drum transport.

  • Built to Your Footprint — Made to order in the length and width you need; UltraTech suggests about 2 feet of clearance on every side of the equipment when space allows.
  • Hands-Free Living Hinge Ends — The 12-inch end walls bend under vehicles and equipment and snap back upright on their own, so nobody has to lower or raise them.
  • PVC-Supported Long Sides — The two long sides stand on PVC sidewall assemblies, and turning their feet lets those walls fold down when the berm is stored or relocated.
  • 28 oz. Copolymer 2000 Fabric — Copolymer 2000 is UltraTech's standard berm fabric at 28 oz. per square yard, rated for service from -25°F to 160°F with broad chemical compatibility.
  • Helps Meet EPA and SPCC Rules — Provides secondary containment that helps facilities meet the EPA container storage rule 40 CFR 264.175 and SPCC requirements under 40 CFR 112.
  • Optional Floor Protection — A ground tarp underneath guards against punctures from rocks and debris, and track belts inside take the tire wear where vehicles drive in and out.

Made to order. This item is built to your dimensions, so it is priced by quote. Use Add to quote and include the size you need (length and width, plus wall height for berms, or your drain/grate measurements for stormwater items). We confirm the price, freight and lead time with you before anything is ordered.

Model Number
8514
Product Type
Ultra-Containment Berm, Ultimate Model
Sizing
Custom — built to your required length and width
Wall Height
12" (305 mm) standard
Material
Copolymer 2000 (28 oz/yd²)
Operating Temperature
-25°F to 160°F (-32°C to 71°C)
End Walls
Living hinge; drive-in / drive-out without lowering
Sidewall Supports
PVC sidewall assemblies with swivel feet (long sides)
Compliance
Helps meet EPA 40 CFR 264.175 (container storage) and SPCC 40 CFR 112
Prop 65
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer, birth defects, or reproductive harm. For more information, go to www.P65Warnings.ca.gov.
UPC
808416085143
Country of Origin
USA
Brand
UltraTech International
Goes with

Goes with this berm

The heat-gun kit patches Copolymer and XR-5 berm fabric; the hose stand and track belts protect the walls and floor.

Buying with confidence

Common questions

Ask a specialist

Warehouse Gear Hub is an authorized national distributor of material handling and safety equipment. If your answer is not here, a specialist will pick up the phone.

Who is Warehouse Gear Hub?

An authorized national distributor of industrial equipment, material handling systems and regulatory safety solutions, supplying manufacturing facilities, commercial warehouses, government entities and small businesses nationwide.

We partner directly with the brands we carry, which is how we keep facilities compliant with OSHA and EPA standards without boutique pricing. Need a formal quote, volume pricing, or to buy on a corporate PO? Submit an RFQ and our team returns a customized quote within 2 business hours. Tax-exempt organizations should contact us before ordering so we can apply your status up front.

Reach a specialist directly on 1-800-794-1049, Monday to Friday, 8:00 AM to 4:00 PM CST. Emails received in business hours are answered within two hours.

What happens after I purchase?

You get an order confirmation straight away. An equipment specialist then reviews the order and confirms freight mode before anything is dispatched, so fit and delivery are checked by a person rather than just a cart.

Most orders ship within 3 to 5 business days and tracking is emailed the moment the unit leaves. Larger equipment travels by LTL freight to curbside, and the carrier calls you to arrange a delivery window. If your site has no loading dock, add liftgate service on the product page before checkout.

Is my product authentic and does it come with warranty?

Yes. Warehouse Gear Hub is an authorized distributor and we buy direct from the brands we carry, so every unit arrives new and genuine, backed by the manufacturer's own warranty. Nothing we sell is grey-market or refurbished.

Warranty terms are set by each manufacturer and vary by model, so rather than quote a blanket figure we print the exact term on the product's own page wherever one applies. Not every item carries a stated warranty. If you need coverage confirmed in writing before you order, call us and we will get it from the manufacturer.

What happens if there is a problem with my order?

Inspect the shipment before you sign for it. Note any damage on the delivery receipt, because that receipt is what a freight claim rests on and a clean signature makes damage far harder to recover.

Then call 1-800-794-1049 or email info@warehousegearhub.com with photos from several angles, and we file the freight claim on your behalf within 48 hours. If anything arrives missing or incorrect, tell us right away and we will put it right.

Eligible items can be returned within 30 days of receipt in their original packaging. Some products carry a restocking fee of up to 15% and return shipping is usually the buyer's; we confirm both before you commit to a return, so there are no surprises.

Where will my order ship from?

Direct from the manufacturer or their nearest regional distribution center rather than from one central warehouse. That is normally the shortest and cheapest route to your dock, though it does mean the origin depends on the brand and on where you are.

If you need the origin and transit time in advance, whether for scheduling receiving or booking a delivery appointment, ask when you request your quote and we will confirm both.

Can I get a discount if I pay via wire transfer or ACH?

Yes. Paying by wire transfer or ACH takes 2% off your order total, because it saves the card processing fees. On a 30,000 dollar machine that is 600 dollars back in your budget.

Request a quote or call 1-800-794-1049 and your specialist will issue the invoice with the 2% already applied.

Related

Alternatives & parts

All Containment Berms